
5. As the press run continues, observe the
changes in pH and conductivity. When printing
problems such as plugging or scumming
begin, the dampening solution is probably
contaminated. Record your ndings in the press
log book and remix a fresh batch of solution.
6. If alcohol is used in your fountain solution, it
should be added after the solution has been
mixed to the desired conductivity range. Alcohol
has no conductivity, and it dilutes the solution
conductivity value. To properly monitor a
solution containing alcohol while running, the
reading after dilution should be used as the
"standard”.
7. Drain and clean your dampening system
weekly.
REPLACEMENT/OPTIONS
These items can be obtained from your local dealer:
Item Description
M6/PH Conductivity/pH meter (Ranges:
0-5000 µS; 2-12 pH)
512M5 Conductivity meter (Range: 0-5000 µS)
EP Conductivity meter for DI water system
testing
(5 ranges: 0-0.5, 5, 50, 500, 5000 µS)
EP11/PH Conductivity/pH meter for checking
reverse osmosis water treatment
systems
(4 conductivity ranges: 0-10, 100, 1000,
10,000 µS; pH range 2-12)
6PII Conductivity, TDS, Resistivity, pH, ORP
& Temperature
CLK Litho-Kit only (without instrument) for
512M5 or other conductivity model
PLK Litho-Kit only (without instrument) for
M6/PH or other conductivity/pH model
ULK Litho-Kit only (without instrument) for
Ultrameter 6PII instruments
pH 4 Buffer* pH calibration solution
pH 7 Buffer* pH calibration solution
pH 10 Buffer* pH calibration solution
442-3000* 3900 microsiemens Conductivity
Standard Solution
KCl-7000* 7000 microsiemens Conductivity
Standard Solution
CSFP Calibrating Solution Four-Pack (1 ea., 2oz
bottles pH 4, 7, 10 & 442-3000)
PS35 Plastic Syringe (35 CC)
TM Thermometer
M6/pH
512M5
6PII
*Available in 2oz., quart and gallon sizes
Comentarios a estos manuales