
FEATURES and SPECIFICATIONS
A. Features
• Superior resolution 3 1/2 digit LCD
• Accuracy of ± .05 pH units
• All electrodes are internal for maximum protection
• Latest sensor technology
• Water resistant
• Easy calibration
• Temperature Accuracy of ±1° C/F
B. General Specifications
Display 3 1/2 Digit LCD
Dimensions (LxWxH) 7.7x2.7x2.5 in.
196x68x64 mm
Weight 10.8oz./310g
Case Material ABS
pH Sensor Well Capacity 0.04 oz./1.2 ml
Power 9V Alkaline Battery
Battery Life >100 Hours/5000 Readings
Operating/Storage Temperature 32-132°F/0-55°C
Protection Ratings IP64/NEMA 3
C. Specification Chart
D. Warranty/Service
The pH1, has a 2 year warranty excluding the pH sensor which has a
limited 6 month warranty. If an instrument fails to operate properly, see
Troubleshooting Chart, pg. 12. The battery and pH sensor are user-replaceable
For other service, return the instrument prepaid to the Myron L Company.
If, in the opinion of the factory, failure was due to materials or
workmanship, repair or replacement will be made without charge. A
reasonable service charge will be made for diagnosis or repairs due to
normal wear, abuse or tampering. This warranty is limited to the repair or
replacement of the pH1 only. The Myron L Company assumes no other
responsibility or liability.
E. TechPro™ Series Models
Additional information available on our web site at:
www.myronl.com
TechPro Series Models pH1 AR1 ARH1
Parameters pH Conductivity or TDS, Conductivity or TDS,
& Temperature & Temperature pH & Temperature
2 3
MYRON L COMPANY
2450 Impala Drive
Carlsbad, CA 92010
USA
760-438-2021
pH1 pH Temperature
Range 0-14 pH 0-71° C
32-160° F
Resolution .01 pH 0.1° C/F
Accuracy ±.05 pH ±1.0° C/F
Auto Temperature 0-71° C
Compensation 32 - 160° F
Comentarios a estos manuales